Products >> Surface Pump >> Vortex Pump

PM45-80 Peripheral Water Pump

Product No.：20226912533
Price：19USD-25USD
Product name：PM45-80 peripheral water pump for household booster water
Horsepower：0.5HP-1.0HP
Model Number：PM Series
Material：Iron Pump Head,Alu Pump Casting,Brass Impeller
Voltage：110V/60Hz, 220V/50Hz
Other：MOQ: 100 PCS; lead time 20-25 days loose cargo / 30-36 days container
Online Inquiry

Type: PM45-80

Operating conditions:

1. Liquid temperature up to 60℃

2. Ambient temperature up to 40℃

3. Total suction lift to 8m

4. Continuous duty

Motor

1. Two-Pole induction motor (n=2900r. P. M. )

2. Insulation Class: B/F

3. Protection: IP44

Material

1. Pump body: Cast Iron/Brass insert

2. Motor Support: Cast Iron

3. Impeller: Brass

4. Shaft with rotor: 45# Carbon Steel/Stainless Steel

5. Mechanical seal: Carbon/Ceramic

Application:

-Volumetric water pumps able to offer high pressures in relation to comparatively low powers and which have particularly steady operating curves.

-They are qualified in domestic fittings, to in crease the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units.

-For the correct functioning of the pump, use clean water, or non-aggressive liquids only, without sand or other solid impurities.

PARAMETER DATA:

NO.	TYPE	POWER		MAX.FLOW	MAX.HEAD	INLET/OUTLET	MAX.SUCT	N.W	PACKING DIMENSION
NO.	TYPE	(Kw)	(Hp)	(L/min)	(m)	(Inch)	(m)	(K.g)	(mm)
A	PM45	0.37	0.5	35	35	1"*1"	9	5.5	270180235

B	PM80	0.75	1.0	60	50	1"*1"	9	8.5	285185260

PM45-80 Peripheral Water Pump Overview

The PM45-80 peripheral pump series is built for clean water transfer and household pressure boosting. It is suitable for importers who need compact surface pumps across 0.5HP to 1.0HP ranges.

Recommended Applications

Household booster water supply
Clean water transfer for small systems
Wholesale surface pump distribution

Ordering Information for Export Buyers

Standard MOQ is 100 pcs. Typical lead time is 20-25 days for loose cargo or 30-36 days for one container, with final terms confirmed in the quotation. OEM branding, carton design, voltage and plug configuration can be discussed according to the order quantity and destination market.

FAQ

Q: What information should I provide before quotation?
A: Please send required flow, total head, voltage/frequency, quantity, water source and application.

Q: Is this pump suitable for clean water?
A: Yes. This model is intended for clean water applications. Avoid sand, sewage, chemicals or high-solid liquids unless a suitable pump type is confirmed.

Q: What certificates are available?
A: ISO 9001 documentation is available. CE documents depend on the exact model and destination market.